Research paper pump

Centrifugal pump is the most common type of industrial pump, which pumps a liquid by forcing it through a paddle wheel or impeller. Due to the impact of the impeller, the pumped fluid is sucked axially into the pump, then it is radially accelerated and finally discharged. The idea of ??the centrifugal pump is difficult to date.

In 1735, Demour invented the pump based on the same principle for using it in the gardens of the King. However, these inventions were rather rare, and it was not until the second half of the nineteenth century, when this type of machine appeared in other form than prototypes.

The design of a submersible pumping unit, under most conditions, is not a difficult task, especially if reliable data is available. But if the information, especially that pertaining to the well's capacity, is poor the design will usually be marginal. Bad data often results in a misapplied pump and costly operation.

Proper design and monitoring requires an accurate description of the Pressure- Volume-Temperature, and phase behavior of produced fluids. Finally, the pump must be considered as a series of indi- vidual stages (or individual pumps).